Phone 0414 579 505
Your vision is our business!

Compliance

All Glass Fence Constructions pool fences & products are made to meet the stringent Australian Standards for Pool Fencing. These being:

AS1926.1-2007. This Standard specifies the requirements for the design, construction and performance of fences, gates, retaining walls, windows, door sets and balconies intended to form a a barrier that will restrict the access of young children to swimming pools.

AS1926.2-2007. This standard sets out options for the location of safety barriers intended to restrict the access of young children to swimming pools. We understand the importance of your family's safety, security and your peace of mind. We therefore always adhere to the Standards set by the Standards Australia Limited.

The other Australian Standards we comply with for installing our products are:

  • Stainless Steel Clamp complies with AS 1170 Structural Design Actions
  • 10mm Toughened Glass complies with AS/NZ 2208 - 1996 Safety Glazing in Materials
  • 12mm Toughened Glass complies with AS/NZ 2208 - 1996 Safety Glazing in Materials
  • 50mm Semi-Frameless Glass Pool Fencing System is installed to comply with AS/NZ 1926.1 Swimming Pool Safety Standard.
  • Frameless Glass Pool Fencing System is installed to comply with AS/NZ 1926.1 Swimming Pool Safety Standard
  • Glass Clamp complies to AS 1926.1 Swimming Pool Safety Standard and AS 1170 Structural Design Actions.
  • 10mm & 12mm Glass complies with AS 2047-1999 Windows in Buildings and AS 1288-2006 Glass in Buildings.
 
 
Free Quote - Contact Us
Phone 0414 579 505
 
Email

ua.moc.snoitcurtsnocecnefssalg@werdna  
   

Please complete the following form for one of our experts to arrange your free quote!

* Mandatory fields

Name: *
Phone: *
Suburb:
Email: *
Interested in:
Message:*
 
 
 
Tips and Tricks
Care and Maintenance
  • Just as you maintain the appearance of your car, powder coated and glass surfaces need routine cleaning to remove dirt and grime. This ensures that you maintain the decorative and protective properties of the coating.
  • Just a gentle clean wash with a soft brush and mild detergent followed by a fresh water rinse will maintain the long term performance of your powder coated products.
  • Warning: strong abrasive house hold cleaners and solvents including those recommend for thinning paints such as MEK or paint thinners are harmful to powder coating these must not be used.
  • Acidic and alcohol based cleaning products should also not be used.